XR Brands Master Series Titty Taunter is a pair of screw-adjusted nipple clamps connected by chains to a weighted bead. The manufacturer lists a 2.1-ounce bead, approximately 60 g, with rubber contact tips on the clamps. Choose it when controlled clamping and added hanging tension are specifically wanted, and assess both adjustments separately. The included bead is part of the set, not a reason to add unverified extra weight.
XR Brands Master Series Titty Taunter: design and controls
Titty Taunter has two separate pressure-related features: the screws adjust each clamp, and the bead adds a hanging load through the chains. The bead's approximate 60 g weight is not the total product weight. The maximum listed opening is about 1.3 cm, which describes how far a clamp opens rather than a fit guarantee or a suggested pressure.
Choosing and using this model
Practise loosening the screws before body contact. Begin with minimal pressure and keep the bead supported while checking the fit, then follow the exact use directions. Movement of the bead can change the pull, so a comfortable still position does not establish comfort during motion. The wearer should be able to end the contact immediately. Do not add extra load or continue through pain or numbness.
Choose this Master Series set if adjustable clamping plus the included weight are the features you want. A plain clamp set is a different option when added hanging tension is unnecessary. The rubber tips change the contact surface but do not eliminate pressure risks or establish allergy-free use. No universal wear duration or extra-weight capacity should be inferred from the product's metal construction.
Before choosing a weighted clamp, distinguish the contact adjustment from the load hanging below it. A screw position is not a measured pressure setting, and matching both screws visually does not guarantee equal sensation. Check each side individually and keep movement predictable. Clothing, posture and the position of the bead can alter the direction of the chains. Leave enough room to reach both release points without pulling the set. If the desired experience is simply light contact, choose equipment designed for that purpose rather than relying on an added weight to remain stationary.
Materials, cleaning and storage
Clean the tips, clamp bodies, screws and chain joins under the supplied directions for their materials. The bead is zinc alloy, while the other metal sections are iron and steel, so avoid assuming one chemical treatment suits every part. Dry fully and check for corrosion, damaged tips or a screw that no longer releases smoothly. Store without tension on the chain.
Keep the product's care instructions with it so that cleaning does not depend on remembering directions from a different accessory. Check the contact surface in good light before every session. A tear, rough edge, loose component or persistent residue needs attention before further use. Clean after use by the permitted method, allow all relevant areas to dry and store away from sharp objects. Where lubrication is appropriate, select it by the confirmed contact material and the manufacturer's guidance. A familiar appearance does not establish compatibility with every lubricant or cleaner. Keep the accessory separate from items that could scratch, stain or deform it. Review its condition again after storage, particularly around joins, openings and moving parts. Replace damaged components only where the manufacturer explicitly permits replacement.
Buy Now from Lovva
Order XR Brands Master Series Titty Taunter from Lovva, a Sydney-based adult wellness retailer. We offer free shipping on orders over $250 AUD. Explore the related collection to compare other shapes and formats before choosing the features that suit your preferences.